Loom Wireless Range Extender

Loom Wireless Range Extender boosts the existing network signal of your house. This extender is compatible with the Alexa device. Loom extenders are used to access the internet in large areas. The repeater comes with a 2.4GHZ frequency and covers a range of up to 2640sq.Ft area. This extender has one LAN port for connecting your devices using a wired connection. This device also can easily control using the mobile app, which its manufacturers design.

The installation of this extender is very simple. It supports WPS function; just by pressing a single button, you can connect your networking device to the loom extender. The setup process is not so complicated by an online web browser. It provides a larger range area in your house to enjoy internet surfing or online games. Approximately 35+ devices can access the internet at the same time.

The External 360° antennas boost the signal in the wide areas and also increase the internet coverage area.

Superior features of the loom wireless range extender

2640sq.ft Coverage

This device eliminates all the dead zones indoors&outside. Blast through barriers and covers up to 2640sq.ft. Other Wi-FI boosters failed to extend range behind stick walls, cement floors, appliances. At the same time, the loom wifi extender delivers an ultra-fast speed internet connection and more bandwidth for live streaming online games.

House with full network range, 35 devices + No bugs

The Loom wifi range repeater has an ethernet port, which provides an ultra-fast speed connection. This is an Alexa-compatible device. This device has lightning-fast data capabilities for all tablets, smart speakers, cameras, FireStick, Roku, Games, etc. Never let your stream down.

USA Designed

Speed of 300Mbps with 2.4GHz processor. It comes with WEP/WPA/WPA2 security protocols to secure your house network from malware or other harmful assets. This is an ideal WI-Fi extender for houseful kids. Who downloads things without having website knowledge.

 

Single-button setup

Tap on the WPS button and connect your device within no time. There is no need to wait for ‘lights to ON” like other router range extenders. Just unbox, turn on and tap.

5 Modes

Whether you’re running a business or running online classes, streaming 35 devices, these 5 modes allow performing all activities without network interference. Can use 5 modes. Router mode, Client mode, wisp mode, repeater mode, access point mode, and TICK TICK BOOM. You will get a faster network than all your neighbors combined.

How to install my Loom WiFi Extender?

The installation of the loom wifi range repeater is very simple; follow these given steps.

  • Take out the device from the packaging box and collect all the accessories.
  • Please select a location for your extender where you want to install it. Choose an optimal location not too far from the router or not too close. Note other electric appliances or networking devices are not placed nearby the extender.
  • Plug the extender into the electric board. Also, turn “ON’ the power button.
  • Simply, turn on the WPS function by tapping on the WPS button of your router and extender. (within 2 minutes, you have to tap WPS).
  • Wait for the loom wi-fi extender lights to turn solid. It means your home router network is successfully connected with the extender.
  • Now, turn on your computer/laptop. Enable Wi-Fi and connect with the loom extender wi-fi network using the Password.
  • The device is installed fully.

Watch your favorite online movie/show. Now, you can surf the internet.

Loom WiFi Extender Login

To login into your loom extender using a web browser. Also, follow these given instructions step-by-step.

  • After turning “ON” your extender, open wireless settings on your computer and enable Wi-Fi.
  • Connect your computer/laptop to the loom extender network.
  • Navigate the loom wi-fi extender default IP in the URL box of any web browser. You can also scan the QR code to directly land on the login interface.
  • A loom wi-fi extender login interface will appear on your next window screen.
  • Type admin username and password for login. (Loom Wifi extender default password is “admin”). (Username is “admin”).
  • Tap to the “login’ button, You will land on the loom admin page.
  • Now, settings can be modified. Also, follow on-screen given instructions and set up your loom wireless repeater.
  • Click to “SAVE” to apply the settings.

loom wifi extender signal booster setup

Loom wifi extender setup can easily complete using two ways. You can use an online web browser or also by the WPS button.

Online web browser

  • Decide where you want to install the loom wifi extender. (Select a center hall of your house).
  • Select an open area to place the extender connect it with the electric power outlet. As well as turn “ON” your range extender.
  • Use an ethernet wire and connect the computer to the extender. (Can also connect with Wireless method).
  • After connecting successfully, open any website browser on your same computer. In the top address bar enter loom wifi extender default ip 192.168.10.1 and search.
  • If you are using a phone can also scan the QR code.
  • On the login page, enter loom extender default password “admin”.

More Steps

  • Click to login, On the admin page. Chose your router SSID to extend.
  • Enter the existing Wi-Fi security key in the password bar and click to save.
  • Wait until it is connected, don’t close the window. (Takes 30 seconds).
  • After setup completes, your extender will reboot automatically.
  • Connect your device to an extended wifi network to enhance the wifi experience.

Note – The new extended network name will appear with the same name as your existing network name with “PLUS” in the end. The Password will have the same as your router WI-FI.

Connect loom wifi extender to the router using WPS

  • Plug the extender next to the wireless router.
  • Go to your router and press the router WPS for 2 seconds.
  • Press WPS of extender for 2 seconds. Caution: Holding the WPS button too long will reset the device.
  • Note the LED light it appears solid Wi-Fi light means the connection is done.
  • Connect your devices with the extender network. (the Wi-Fi password is the same as your existing Wi-FI network).

Loom Extender troubleshooting - not connecting to the wifi router

If your Wi-Fi extender is unable to connect with a wireless router, there may be various reasons behind this problem. Follow these steps to fix it instantly.

  • Check the wireless extender is in the router’s range if your selected installation location is farther from the router. Also, Change the location.
  • If you are using a wired connection to connect your extender to the router, ensure the ethernet cable is working well, also not damaged.
  • Restart your extender and router. Try to connect again.
  • If still not connecting, update your extender firmware.
  • Factory reset loom extender.

loom wireless range extender not working

  • Check your extender plug-in into the electric board. It’s not damaged, try to connect in any other.
  • Reboot your extender by unplugging all the wires.
  • Ensure your router is working and also, the internet is working.
  • Verify loom wireless range extender has a full range coverage of the wireless router.

Why is the Loom wifi extender not showing up?

  • Check the Wi-Fi settings and restore the settings as default.
  • Ensure your device is plug-in correctly.
  • Check your device is also in the range of the extender.
  • Use a wired connection to connect. Instead, of using the wireless method.
  • When it does not show up then you can try ap.setup in the web browser.

Loom wifi extender no internet

  • Maybe because an internet outage is going into your area, contact the internet service provider.
  • Ensure your home network router has an internet connection and the network cable is connected with the router.
  • Check the cables connected to the extender; connections are finger-tight and correct.

How to reset Loom WiFi Extender?

Loom wireless range extender mainly covers all the uncovered areas of your router. It will fulfill the blank areas with the Wi-Fi network. But sometimes, it may show many issues while connecting to a router or a common issue. So let’s go for loom wifi extender troubleshooting.

To reset your loom extender, you need to turn on the device. Then long-press the WPS button of the extender for 10 seconds.

The extender will automatically reset and also set back to default settings.

FAQs

From where to buy loom extender?
You can also buy it from the loom wifi extender official website: https://usa-loom.com/

How to reach loom wifi extender customer service?
loom customer care number submit a request at https://support.loom.com/hc/en-us/requests/new

How much area does the loom extender cover?
signal boost up to 2640sq ft, with 300Mbps.

Is Loom is a dual-band extender?
No, it’s only a single 2.4Ghz band.

loom WiFi range extender signal booster reviews

Loom wifi extender signal booster up to 2640sq ft comes with a single 2.4GHz band. This is a signal extender it will not increase the network speed of the router. You can enjoy network as a whole home without any dropping connections issues. The Wi-Fi extender has one ethernet port for wired connection and 5 modes. Such as access point mode, Client mode, wisp mode, repeater, router. Delivers speed up to 300Mbps. 35 devices can simultaneously use the internet connection. In last, this is good to use in your house/office and comes at a suitable price.