Nextfi wifi extender
The NextFi wifi extender is an advanced extender that is capable of being used in a large area because of its wide network providing service. It was introduced first on 15 March, 2021. This advanced extender is manufactured by FREEZE2TRIM. This extender comes in an inexpensive range of 34.99$. This extender mainly works to extend the home network and delivers the signal to your smart home Wi-Fi devices. Remove dead zones of your home and fix network problems using nextfi – WiFi Range Extender. This is a powerful device that makes your home full of networks on every corner of your home.

The NextFi wifi range extender has come under the best range extender category. This extender provides super-fast wifi, boosts network signal up to 1200Mbps. Provides a large wireless coverage, gets rid of dead spots and enjoys the fastest internet connection in your whole home. It comes with high powerful antennas which helps the network to go through walls and multiple floors. Installation is very easy and just takes 60 seconds, just plug and play!. Comes with WPA, WPA2, PSK, WLAN Security to browse safely. This device has a portable and compact design that allows enjoying networking anywhere in your home.

Nextfi wifi range extender installation

Want to increase the signal capacity of your home router? People like it the most and it has won the world’s heart because it includes a very easy installation process. Most of the users recover from the problem whenever it troubles you. Follow the given instructions.

  • The first step is to locate a suitable location for nextfi range extender installation. Then, unpack it (if it’s new) and also collect all the accessories that come along with it.
  • After searching for a suitable location, place it there. Make sure the extender will place in the center of the home router. Also ensure the distance of other wireless home appliances is not too much.
  • Read all the nextfi wifi extender instructions given in the manual, before installation.
  • Now, plug the extender into the electrical outlet and turn it “ON”.
  • The signal light will start after turning it ‘ON’. Now connect your extender with the home router network.

The installation process is finished; now let’s go to connect the nextfi wifi booster to the router.

How to connect the Nextfi wifi booster to the home router?

To connect your nextfi wifi booster with the host router network, follow these below steps:

  • The Nextfi wifi extender WPS method is very easy and straightforward to connect with the host router.
  • Plug the extender into the power socket, make sure to connect near the host router.
  • To pair, push the WPS button of your host router.
  • Go to the extender and quickly press the Nextfi wifi extender wps button within 2 minutes and wait.
  • Note the internet signal LED light if it’s blinking. This means the connection is successfully established between both devices.

Connect your home smart Wi-Fi appliances with the extender network.

TIP – To connect home devices with the extender network you need to select SSID. The extended SSID will be the same as your host router SSID and the nextfi extender default password is also the same as the host router security key.

Follow steps to change SSID and Nextfi wifi extender configuration

For nextfi extender setup follow these given steps:

  • Power on your extender and connect your computer via ethernet or WI-Fi.
  • Now, on the same computer launch any default web browser for nextfi wifi extender login.
  • In the URL field enter the default Ip or the nextfi extender 192.168.188.1 or hit ap.setup.
  • On your computer screen, you will get the nextfi extender login page, enter the default username and password for login: ‘admin’.
  • After login, you will redirect to the extender main page, here go ahead to configure the settings manually.
  • Follow all the on-screen instructions given by the setup wizard to configure.
  • Configure both 2.4Ghz and 5Ghz wireless networks. By tapping on “wireless” then select 2.4Ghz, change SSID, and choose security type. Then input a new password and click to apply.
  • Follow the same way to configure the 5Ghz band network connection.
  • After doing all changes, click on the “apply” button to save the changes. Verify the Nextfi setup by checking RE LED.

So all these instructions are useful to configure a new nextfi extender.

Troubleshooting

In very rare chances encounter an error in nextfi, unfortunately, if you are troubled with nextfi extender issue. Follow these given steps.

When Nextfi wifi extender not working follow these steps:

  • Simply turn off the extender by pressing its power button.
  • Wait for some time and leave it unplugged.
  • Now, plug it into the electric outlet and turn it “ON”.
  • Wait for the power LED until it’s stable.
  • Connect your devices to the extender and check the signal light status to check if the internet is working.

No internet issue

If your Wi-Fi extender has no internet, follow these given steps to resolve this issue.

  • Ensure the extender is connected to the host router via an ethernet cable or Wi-Fi.
  • Try to connect again after disconnecting and connecting again.
  • Ensure the network settings are configured correctly, maybe you did a mistake during configuring the extender settings.
  • Restart your extender and try again to connect. If still facing Nextfi extender no internet issue performs a factory reset and sets settings back to default.

Nextfi wifi range extender LED lights does not flashing

  • Unplug the extender and plug it in any other nearby electrical outlet.
  • Ensure all the connections of the extender are finger-tight and connected correctly.
  • Update nextfi range extender firmware, if the current version is outdated.
  • Make sure the extender power LED has light. If not, it means the extender is not getting power. Connect it to another electric source.

Common issues

  • If the extender network is frequently disconnecting or unstable, please ensure it’s placed in an optimal location. Where it will get enough range coverage.
  • In case, if the range extender is not connecting to the host router. Please check the network settings on the extender and use a wired connection.
  • Sometimes Nextfi extender login may not work or 192.168.188.1 is unable to open. In this case enter Nextfi extender’s official website: https://www.getnextfi.com
  • Check for nextfi extender firmware updates, if available download it and upgrade to the latest version.

How to reset my nextfi wifi booster?

To troubleshoot the extender issue, or in case you forgot the nextfi default login password. You need to reset your extender to change its settings to default. Follow these given steps to reset.

  • Turn on the nextfi wifi repeater.
  • Look at the backside of the extender, near the WAN port a small reset button is available.
  • Press the “RESET” button continuously for 5 seconds.
  • The LED indicators will start to blink randomly. Wait until the extender restarts itself automatically.
  • All the settings will automatically change and be set to default, after reset.

In this way, you can easily reset your extender manually. Now, you need to configure the extender once more. Use the above mentioned steps.

Reviews :

If you want to get the best extender at an affordable price. Then, the Nextfi wifi range extender is a good choice. This is a dual-band extender that will never let down your home router network. It will come with extraordinary features with the latest technology. It provides a combined speed of 1200Mbps in dual-band frequency 2.4Ghz and 5Ghz. The installation of this extender is super easy. Within 1 minute you can enjoy the network. This extender is available on online shopping sites. Please check product reviews before buying them.