Uppoon wifi extender

Uppoon WiFi Extender is a dual-band frequency range extender, which allows a high-speed internet connection. Its wireless band 2.4Ghz and 5Ghz provide a combined speed of up to 1200Mbps. Uppoon WIFI booster is compatible with all networking routers, access points brands. You can set up an Uppoon WiFi extender in three different methods. Can also create a connection without a physical connection, you can read the easiest uppoon wifi extender setup instructions which are available on the uppoon wifi extender manual that comes along with the extender in the packaging box. If you are thinking of buying a new extender. The uppoon wifi extender signal booster is the best extender to fix the signal issues without using a wired connection.

The Uppoon WiFi Extender comes with high-gain 43dBi external antennas that will boost the wireless network up to 5000sq.ft. This extender is compatible with single-band as well as dual-band routers. If your router has dual-band 2.4Ghz, 5Ghz you can use this extender. If in your home there are so many dead zones available. Use this extender to extend the host router range. The installation is super-easy and straightforward. You can use WPS setup mode to connect your extender with the router and increase the network range instantly.

Uppoon wifi extender manual

Uppoon wireless signal extender makes your home full of networks by eliminating all the dead zones. This extender provides a dual-band frequency and is compatible with all standard routers. In the uppoon wifi extender manual you will get all the basic details related to your device such as Uppoon wifi extender setup instructions, Quick installation guide, LED description, FAQs, Specifications, troubleshooting, etc. If you are going to connect an uppoon wifi extender to a new router, you can read the manual which helps you to select an optimal location, where you will get the best signal output.

 

How to install uppoon wifi range extender

Uppoon wireless range extender installation steps are easy. Please unbox the packaging box and collect all the accessories that come along with the extender. Follow these steps:

  • Plug the extender at the nearest location of your router and turn it “ON”
  • Find and locate the WPS button on your wireless router and press it for 5 seconds.
  • Within 2 minutes press the WPS of your extender.
  • Wait for some time until the extender connects with the router, you can verify the status by checking the uppoon wifi extender led status.
  • Now, Unplug your extender and place it in a middle location, between your home router and dead zone areas.
  • Connect your home Wi-Fi devices with the extender network and enjoy fast and wide-range networks.

TIP – Please keep in mind after connecting using WPS mode, your extender SSID and password will remain the same as your host router SSID and password. If you are using a dual-band router the SSID may appear as “Uppoon-2G” OR “Uppoon-5G ” in the wireless network list.

Super easy ways for Uppoon wireless extender Setup using the web interface

The uppoon wifi repeater set up via an online browser is a second method to configure settings if your home router does not support the WPS method. This method is simple, follow these steps:

  • Plug your extender into the electric socket and press the power button.
  • Wait until the extender is powered on properly.
  • Open WI-FI settings in your smartphone, tablet, laptop and connect with Uppoon wifi extender network, SSID ending with _EXT. If you have a computer, use an ethernet cable and connect one side with the extender port and another to the computer port.
  • Launch any web browser on the same computer such as safari, chrome, opera-mini, any. In the address field enter uppoon wifi extender ip address or ap.setup searches for it.

Tip – The default IP Address of the uppoon wifi repeater is 192.168.11.1.

  • After searching this address in the URL bar, you will redirect to the uppoon login page.
  • Input uppoon wifi extender password and click “Login”.
Uppoon wifi extender default username and password is ‘admin’
  • Now, you’re on the Uppoon extender management page, Select “Repeater Mode” and continue for the next step.
  • Choose your host router SSID from the given network list. Use the correct password and connect with it.
  • After connecting select “wireless network” settings and configure 2.4Ghz or 5Ghz network. Rename SSID and password as your choice.
  • Lastly, click on “apply” to save settings. Now connect your home network devices with the Uppoon extender network and enjoy range in your whole home.

So all these useful steps for uppoon web setup are for beginners; who are getting any kind of issues while configuring the extender settings.

How to login the repeater?

To change Uppoon extender default password, parental control, manage network parameters, etc. You need to access Uppoon wifi extender login page, follow these steps:

  • Launch any web browser on a mobile/computer/laptop. In which the UPPOON network is connected.
  • At the top, in the address field enter myrepeater.net or http://192.168.11.1 and search for it. Uppoon extender admin login page will appear.
  • Enter the default login credentials to make a login. If you didn’t change the login password use ‘admin’ for login.

Tip – To access the extender login portal, make sure your device(you’re using to access login) is connected to the same extender network.

Uppoon wireless range extender WPS setup

Power on your extender, ensure it’s in range of your host router. Go to the router and press the WPS continuously for 5 seconds. Press the WPS button of your extender too within 2 minutes. Wait for some time, the extender and router connect with each other through a WiFi-protected secured gateway. Note the LED status to confirm the connectivity status.

After connecting, connect your home wireless devices to the extender network and use the internet all over your home, Without any network interruptions.

WiFi Repeater troubleshooting

Uppoon extenders may encounter a number of common issues. If you don’t have a little bit of knowledge of technology follow these simple steps to fix uppoon extender problems instantly.

Uppoon wifi extender not working

Follow these given steps for Uppoon troubleshooting –

  • Make sure the extender is in the range of your host router. Place your extender at the mid-location of the device and the router.
  • Ensure the Wi-Fi security key you’re using is correct.
  • Configure uppoon wifi extender correctly. Do not skip any step while configuring its settings.
  • Please hook the extender into any other electrical socket. Maybe the extender suffered a power outage issue.
  • Login to the extender using the web interface and verify the internet connection. Check the host router has internet connectivity.
  • Connect via wired connection using ethernet and check if this step is useful.
  • Restart or reset uppoon wifi extender and set it up again.

Uppoon wifi extender reset - super easy steps

Be careful! After resetting all the current settings of the extender will reset to factory defaults. The reset process is useful to troubleshoot many common problems of range extender. Follow these simple steps to reset:

  • Turn on your extender, press the uppoon extender reset button(available on the reset hole at the back-side).
  • Note the Uppoon extender LED lights, release the button when it’s started to blink randomly.
  • After some time the extender indicates successful instruction by stable light.

Upon Extender login not working?

If you are facing any upon extender login problem such as login page not working, 192.168.11.1 not working. Follow these steps:

  • Please ensure your mobile data is off while accessing the login page. For the uppoon extender login “UPPOON 2 G or UPPOON 5 G” network is required.
  • Try to access http://192.168.11.1 OR http://ap.setup in any other web browser. Maybe the currently used browser is not supported to open.
  • Check the admin login password is entered correctly. If you forgot the UPPOON extender login password. Reset your extender to retrieve the password.
  • Ensure your device(in which you are accessing the login page) is in the range of the extender network.

Reviews

This extender is available in the market, you can buy it from online shopping sites. The installation of this device is completed within a few minutes. It provides super-fast speed and wide coverage. Compared to other available extenders in the market, this extender is best. It comes with 43dBi high-gain antennas for better Wi-Fi coverage. The uppoon wifi repeater setup page is very easy and understandable. Beginners can easily configure settings following uppoon extender setup wizard instructions.

Also read up the details for “Rockspace AC1200 Wireless Extender“

Nowadays, this extender is becoming popular day by day. Go for it if you are thinking of buying an extender.