Victony WiFI Extender

Victony Ac1200 and N300 Range Extender deliver a high-speed internet connection by boosting the home’s existing network. The Victony Wifi Extender  is a device that allows you to connect it to the electric plug and after installation, you will also get a high speed of 1200MBPS along with dual-band frequency. The victony extender also comes with external four antennas to keep your WI-FI signal stronger and transmit into large areas. The victony wifi extender login can easily access by using its default, Ip.

In addition, the victony dual-band range extender supports Access point, Router, Repeater mode to boost the network range of your home existing network. So today, we are going to set up a new victony extender using different methods.

Victony WiFi Extender login with a web browser

Follow these steps for Victony login:

  • Plug your extender into the electric outlet as well as turn it “ON”.
  • Wait until the extender boosts up properly. Note the LED turns into solid green power light.
  • Now connect your device computer/laptop to victony extender using Wi-Fi as well as ethernet cable.

Wireless Login

  • Enable WI-Fi and connect to victony WiFi Extender from the Wi-FI list.
  • Open any browser and also use ap.setup or 192.168.10.1 to reach the victony WIFI Extender login page.
  • Enter victony wifi extender username as well as password ‘admin’ and click to log in.
  • You will land on the victony setup wizard.
  • Follow the victony wifi extender instructions to complete the victony extender settings configuration.

Login with Ethernet

  • Take a LAN cable and connect one side with the extender LAN port as well as another side with your computer for the victony extender LAN setup.
  • Open web and enter victony wifi extender ip address 192.168.10.1 in the search bar and click to go.
  • Victony login page also appears on your computer screen.
  • Enter victony extender default password ‘admin’. Username ‘admin’.
  • After login, you will also redirect to the victony wizard page. Follow the on-screen instructions for setup.

Victony wifi repeater setup using WPS

WI-Fi protected setup is the easiest way to connect your extender. Before using this way, please ensure your networking router also supports the WPS function. If router wps not working can also configure using an online web browser.

  • Plug your extender in any wall outlet and turn on the extender. Choose a nearby router location for a better experience.
  • Select victony repeater mode by using the “MODE” button beside the extender.
  • Go to your home router, then locate the WPS button. (Given on the backside).
  • Enable the WPS by pressing the WPS button for seconds. Also, press the extender WPS button.
  • The victony repeater WPS LED starts to blink for 30-40 seconds. Wait until the extender connects to the wireless router.
  • The WI-Fi LED signal shows the status of network broadcasting from the victony extender. Connect your devices with an extended network.
  • Please select an ideal location that has no network interruptions as well as confirms both devices does not too far from each other.

NOTE – After connecting the extender to the router via WPS. The extended Wi-Fi network has the same SSID as the home router. Just the last three digits will change example: VICTONY_EXT. The WI-FI Passphrase of the extended network is the same as the router network password.

Victony WiFi Extender ap/repeater/router modes

The victony range extender provides three different modes. Let’s know how it works: Can also read the Victony wifi extender manual to know more about victony repeater features.

Access Point Mode- this mode helps to create an access point to connect wireless devices directly to the router using an ethernet cable. If users are compatible to use cabling. Can create two access points set on non-overlapping channels with the same SSID.

Repeater Mode- This is similar to access point mode. It also helps to expand the network coverage over a wide area using different SSID (network name). For this, two different router’s required. One will connect to the broadband using an ethernet cable. And another will send out the wireless signal.

Router Mode- In this mode the extender act as a router. It is helpful to create an instant private network. If you don’t have a modem can directly connect broadband to an extender and multiple devices can share the internet.

Victony Wireless Range Extender Setup using a computer or mobile device

Follow the given instructions for victony wireless extender setup using a wireless connection.

  • Plug the extender into a power source.
  • Set mode button to repeater by pushing “Mode Selector” button.
  • Connect any mobile/laptop/computer to “Victony Range Extender”. Using an ethernet cable or WI-FI connection.
  • Open any web browser on the same computer and access http://192.168.10.1 or ap.setup to access the victony wifi extender login page.
  • Here, you also need to submit the username and password for login. ‘Admin’ is the default if you are trying to log in the first time.
  • In the next window, the victony setup wizard will appear on your screen. Here, you will get a list of all nearby active wireless networks.
  • Choose your home existing Wi-Fi network and connect with it using your home router WI-FI security key.
  • If you want to change the extender SSID, enter a new network name in the SSID field as well as choose a password.
  • Click to “apply” after changing all details. The victony wifi extender setup is finished.
  • Wireless Extender takes 2-3 minutes and automatically reboot. The setup is DONE.
  • Now, connect your device’s mobile, pc, laptop to the extender network and also surf the internet.

Troubleshooting

Victony extender is a dual-band Wi-Fi Extender that provides 1200Mbps and expands the home’s existing network. You can easily configure this device using a simple WPS button. So let’s go to fix victony wifi extender problems.

Victony wifi extender not working

Extender not working problem is often faced by users. This kind of issue can raise due to many reasons. In order to fix the victony wifi repeater not working issue, follow the given steps:

  • Check the connections of your extender. Make sure your extender is connected to the wireless router. Check all the connections are finger-tight and inserted into the correct ports.
  • Restart your Wi-Fi Extender, modem, PC and try to connect once again. If still the problem is not solved, also reset the victony wifi extender.
  • Check the firmware of your extender, if it’s outdated. Update the latest version and it may fix your problems.

Victony wifi extender login process not working

  • If you are trying to access the victony login page, and it’s not opening. There may be many reasons behind this issue. Please input http://192.168.101 in the URL box. Try to access. Ensure the IP is correct.
  • If 192.168.10.1 login not working, type http://ap.setup and search for it. You will redirect to the victony extender login page.
  • Check the web browser compatibility, use any other browser and try to access the login URL.
  • Clear all the web history, cached data, cookies and try to open the admin login page again.

How to update the firmware of the victony wireless range extender?

  • To update the victony wifi extender firmware, you need to open the login page. The login to your extender.
  • Click to victony wireless extender advanced settings and select the ‘firmware upgrade’ option.
  • Select new firmware version file and click to “UPGRADE”.

The Victony wifi extender firmware update is finished. Your device will reboot automatically.

How to reset the victony wifi extender?

Plug the extender into an electrical outlet and turn it ON. Now find the victony extender reset button(available on the backside). Press the button for 5 seconds until the LED starts blinking. The extender will automatically enter reset mode and all the settings will change back to default.

In this way, you can easily reset Victony WiFi extender.

Reviews

The victony wireless range extender is a dual-band booster. It will boost the network signal of your home as well as eliminate all the dead zones. It also provides a high-speed data transmission rate 1200Mbps. The extender also comes with 3 modes repeater/router/ap which deals to provide the fastest and most stable internet connection. The setup is very simple via WPS. Just need to press the WPS button and the extender is ready to use. http://ap.setup and http://192.168.10.1 are used to access the web configuration page online. Sometimes victony extender keeps disconnecting. In this case, resetting your extender can easily fix the issue. This is an ideal choice for a small home or business.